Shenzhen Upcera Dental Technology Co., Ltd.
Shenzhen Upcera Dental Technology Co., Ltd.
Add to Cart
Zirconia Blocks Dental Translucent Shade CE FDA CFDA Certificated
Description:
| Cerac in lab(Sirona) | U14S | 14-13-13 |
| U20S | 20-14-15 | |
| U20LS | 20-19-15 | |
| U40S | 40-14-15 | |
| U40LS | 40-19-15 | |
| 55-19-15 | ||
| U55S | 55-19-15 | |
| U65S | 65-25-22 | |
| U65LS | 65-40-22 | |
| U85LS | 85-40-22 |
|
| ST -Color |
| Density before sintering (g/cm3) |
|
| Density after sintering (g/cm3) |
|
| CTE after sintering (25-200℃) |
|
| 3-point bending strength after sintering (MPa) | |
| Accelerate aging surface monoclinic phase content | < 15% |
| Average transmittance (1.0±0.02mm) | |
| Chemical solubility after sintering (μg/cm2) | < 100 |
| Cytotoxicity test | 0 level |
| Radioactivity after sintering (Bq/g) | |
| Sintering temperature (℃) |
|
|
| ST Color |
| crown | √ |
| Bridge | √ |
| 3-4 units bridge | √ |
| 5-6 units bridge | √ |
| Bridges over 7 units | √ |
| Cantilever bridge | √ |
| Inlay bridge | √ |
| Maryland bridge | √ |
| Telescopic crown | √ |
| Personalized abutment | √ |
Our zirconia discs and blocks are made from the zirconia powder which is of superior quality. Our raw material includes high translucent and super translucent zirconia ceramic powder.
The methods used in making our products are compression molding process and cold isostatic pressing process. After cold isostatic pressing, uniform and compact zirconia ceramic blocks are produced, which are very homogenous, high-strength, have excellent biocompatibility and aesthetics.
